Atlas Uni-Grunt |fast drying priming emulsion

ATLAS UNI GRUNT is an impregnating sealer for priming, manufactured on the basis of the finest quality water dispersion of polymer resins.

• reinforces absorptive substrates of any type
• high yield, quick-drying
• decreases and unifies substrate absorptiveness
• for application in temperature up to +30°C
• improves bonding to the substrate
• underneath floors and screeds
• underneath adhesives, plasters, top finishes, paints

Use

• Very short time of drying
• Reinforces top surface of primed mineral substrates – penetrates into material structure, reinforces it and improves its load-bear capacity.
• Prevents “taking in” excessive amount of water from the layer applied upon the substrate – limits the absorption of the substrate.
• Improves yield of paints, top finishes and adhesives – increases yield of materials used for the next layer application, reduces their consumption by sealing structure of a primed substrate.
• Creates temporary protective layers on subfloors – improves the resistance of the floor to dust deposition, facilitates its cleaning (must not be considered as the final finishing layer).
• Facilitates application of the next layers – painting coats, adhesives, top finishes and fillers, floors and self-levelling screeds, adhesives for carpets, wallpapers, adhesives for thermal insulation etc.
• Decreases substrate absorptivity
• Bonds non-stable substrates
• For application with a roller, a brush or with a sprayer.
• Transparent, solvent-free and water-soluble – product is colourless after drying, does not cause substrate discolouration.

Kinds of primed substrates:

• cement floors and screeds, cement and cement-lime plasters and top finishes, walls made of cellular concrete
• walls made of brick or silicate blocks, walls made of brick or ceramic hollow blocks
• cement floors and screeds with floor heating, magnesium screeds
• cladding fixed with cement or gypsum adhesive, mineral waterproofing, cement floors and screeds, anhydride screeds
• cement, cement-lime, gypsum plasters, gypsum, cement top finishes
• painting coats made of indoor acrylic and latex paints, wallpapers

Consumption

The average consumption is 0.05 ÷ 0.2 kg of emulsion for 1 m².

In practice, the consumption depends on the substrate absorptiveness.

Packaging

Plastic containers: 5 kg
Pallet: 540 kg in 5 kg containers.