OptiLight brand belongs to FAKRO group (the second largest manufacturer of roof windows in the world). OptiLight products offer high quality at an affordable price. Modern technology of material handling and processing, quality control in every stage of production, as well as tests performed by independent laboratories guarantee high quality of OptiLight skylights. The shaping of the outer paneling of Optilight window makes her look fashionable and aesthetic. OptiLight roof windows are CE marked.
The air inlet of OptiLight VA type efficiency is up to 20[m³/h]. It is the air quantity, which flows into the room through the window with 78cm or 114 cm width and pressure difference of 10 Pa. Windows with 78cm width and bigger have in the air-inlet slat 2 openings. In windows with 55 and 66 cm width, air-inlet efficiency will be respectively lower and is 15[m³/h]. The windows with 55 and 66 cm width are equipped with air-inlet slat with one opening.
The windows are equipped with 24mm thick, single chamber glazing units (4H-16-4T) providing outstanding insulating properties as well as excellent acoustic performance.
High quality wood
Wooden elements of the OptiLight windows are made from especially sorted, highest quality pinewood which is bonded in layers, impregnated, and coated with an ecological acrylic finish. The wood is protected on the outer surface with weather and UV resistant aluminium profiles.
Additional wood protection
The wooden sash has been equipped with plastic corners protecting those fragile areas from moisture.
Metal cladding elements of OptiLight windows are made of suitably thick aluminium sheet which adds to their resistance to mechanical damage during transport, installation and window usage. The sheet is coated with polyester which is fully weather-resistant.
OptiLight windows have a centre-pivoting construction. The hinges installed in the middle of the window allow the sash to be opened in a range of positions and to be rotated up to 180 degrees. The handle design enables tight closing and two positions of micro ventilation. The handle positioned at the bottom of the sash makes using the window easier and more comfortable, irrespective of the height at which the window is installed.
Wide range of application
Thanks to the construction of windows and flashings OptiLight windows can be installed on roofs at any pitch between 15o and 90o
OptiLight windows has been equipped with taughened external glass.
Advantages of OptiLight windows
The window has a large effective glazing area, which allows more light to enter the room. All windows are double glazed, and use a single chambered construction and acoustic properties, while the U coefficient of the pane is 1.1 [W/m²K]. Space between panes is filled with inert gas. The internal pane is coated with a heat reflecting low-emission layer, externall glass toughend. It helps to reduce heat loss during winter and overheating during summer.
OptiLight windows have a centre-pivoting construction. The hinges installed in the middle of the window allow the sash to be opened in a range of positions and to be rotated up to 180 degrees. The handle design enables tight closing and two positions of micro ventilation. The handle positioned at the bottom of the sash makes using the window easier and more comfortable, irrespective of the height at which the window is installed. Pivot structure and functional handle placed in the bottom part of the sash ensures comfortable use and operation.
Flashings (sold separately)
A flashing is an essential element allowing correct installation of a takfönster in the roof slope. The precisely designed systemic elements of the flashing enable tight and durable integration of the window with roofing. It is very important as the main task of the flashing is to drain water and snow away from the window and protect it against the wind. The flashings are manufacture from aluminium sheet, coated with hard-wearing polyester lacquer. The basic color is Grey – brown (RAL 7022), thanks to which windows go well with standard colors of roofing materials. Flashings are used for connecting the windows with roofing and it is the roofing which decides about their selection.
OptiLight windows can be fitted with choosen additional accessories for FAKRO pivot windows which include internal as well as external accessory:
- ARS, ARP roller blinds
- AJP venetian blinds
- APS pleated blinds
- ARF blackout blinds
- AMS mosquito screens
- ZBB control rods
- AMZ awning blinds
- ARZ Z-Wave, ARZ Solar roller shutters
Compatibility of OptiLight roof windows with FAKRO accessories
|Category||Product||B and VB||VK||WGT and WGI||TLP|
|AJP-E, AJP Z-Wave||-||-||-||+|
|ARP-E, ARP Z-Wave||-||-||-||+|
|ARF-E, ARF Z-Wave||-||-||-||+|
|ARF/D, ARF/D Z-Wave||-||-||-||-|
|Exterior||AMZ, AMZ New Line||+||-||-||+|
|AMZ-E, AMZ Z-Wave||+||+||-||+|
|ARZ-E, ARZ Z-Wave||+||+||-||+|
- Wood | clear lacquered
- center pivot