Atlas Stopter K-50 - 2 in 1 | white adhesive for fixing EPS, mineralwool boards and for mesh embedding

15,18 / 25 kg inc. VAT, excl. shipping
(12,76 excl. VAT and shipping)
MAG-ATL-W-KO009-A0000-AT1A-2500

Ships within 10-12 business days after receipt of your payment

+

Additional products

Atlas Uni-Grunt |fast drying priming emulsion Atlas Uni-Grunt |fast drying priming emulsion 10,46 inc. VAT, excl. shipping (8,79 excl. VAT and shipping)
+

Less than 20 available.
Ships within 1-3 business days after receipt of your payment.

  • Total cost 15,18

Add to wish list

Atlas Stopter K-50 - VIP adhesive: White adhesive for external wall in thermal insulation. Proper for mineral wool and expanded polystyrene (white, graphite-enhanced and with addition of graphite). No priming masses under renders required - the unique structure of hardened adhesive creates a layer that provides a strong bond to thin-coat render, and white cement minimizes the risk of discolouration on the render surface.

Properties

  • High flexibility – perfectly compensates thermal and mechanical stress exerted on other layers of the system.
  • for EPS, XPS and mineral wool
  • Improved crack resistance thanks to fibre glass reinforcement
  • Excellent adhesion – strongly bonds to problematic substrates, such as surfaces with well-bonded paint coats
  • Water vapour permeability – does not restrict water vapour transmission through the insulated wall
  • Very good working properties – during mixing, application to panels, mesh embedding etc.

Substrate types: 

  • concrete of all classes,
  • aerated concrete,
  • cement or lime-cement render, 
  • sandstone and unrendered walls of brick,
  • blocks, 
  • hollow blocks and other ceramic or silicate materials.

Consumption

Exact material consumption per unit area depends on the properties of the substrate (e.g. roughness) and the technique of panel installation.

  • EPS panel installation: between 4.0 and 5.0 kg/m2.
  • Reinforced layer application: between 3.0 and 3.5 kg/m2.
  • MW panel installation: between 4.5 and 5.5 kg/m2.
  • Reinforced layer application: between 5.5 and 6.5 kg/m2.

Packaging

Paper bags 25 kg.

Pallet: 1200 kg in 25 kg bags.

Product comparison

  Stopter K-50 Stopter K-20 Stopter K-100 Hoter U Hoter S Grawis U Grawis S Roker U Roker W
 
Insulation aplication + +   + + + + + +
Mesh embedding + + + +   +   +  
Type of insulation
EPS + + + + + + +    
XPS   + + + +        
Mineral wool +             + +
Parameters
Adhesion to concrete min. 0,25MPa min. 0,25MPa   min. 0,25MPa min. 0,25MPa min. 0,25MPa min. 0,25MPa min 0,25MPa min 0,25MPa
Adhesion to insulation products min. 0,08MPa (EPS)
min.0,08MPa (MW)
min 0,08MPa min. 0,08MPa min. 0,08MPa min. 0,08 MPa min. 0,08MPa min. 0,08MPa min. 0,08MPa min 0,08MPa
Temperature of application 5° to 30°C 0°C to 25°C 5°C to 30°C 5°C to 30°C 5°C to 30°C 5°C to 30°C 5°C to 30°C 5°C to 30°C 5°C to 30°C
Height limit for application
EPS, XPS to 25m to 25m to 25m to 25m to 25m to 25m to 25m    
Mineral wool no limit             no limit no limit

 

 

(DE) Technische Daten (stopter_k50_td_de.pdf, 130 Kb) [Download]

(EN) Technical Data (stopter_k50_td_en.pdf, 247 Kb) [Download]

No posts found

Write a review

Also bought Also bought